Filtration Systems Plumber
Pure-Tech Twin Under Sink Filter System
- Sediment, dirt, rust and other particles filtered down to 0.5 micron
- Taste, odour, chlorine and other chemicals are absorbed by the carbon block technology.
- Has a stand-alone filter tap
To supply and install = $650+GST
EXTRAS
- Should your system require a pressure reduction valve add an extra = $80+GST
- Should a flexible hose connector be required add an extra =$15+GST (each)
- Drilling through stainless sink or timber benchtop only.
Pure-Tech Single In-Line Water Filter
- Sediment, dirt, rust and other particles filtered down to 0.5 micron
- Taste, odour, chlorine and other chemicals are absorbed by the carbon block technology.
- No need for a stand-alone tap, filtered through the mixer tap
To supply and install = $380+GST
EXTRAS
- Should your system require a pressure reduction valve add = $80+GST
- Should a flexible hose connector be required add an extra =$15+GST
Dura In-Line Water Filter
- Sediment, dirt, rust and other particles filtered down to 0.5 micron
- No need for stand-alone tap, filtered through the mixer tap
To supply and install = $275+GST
EXTRAS
- Should your system require a pressure reduction valve add an extra = $80+GST
- Includes 2 x flexible hoses
Stefani Twin Under Sink System
- 5-micron sediment pre filter removes dirt particles & sediment with the sediment filter
- 5-micron carbon filter absorbs chlorine and odours and refines the taste of your water
To supply and install = $299+GST
EXTRAS
- Should your system require a pressure reduction valve add an extra = $80+GST
- Should a flexible hose connector be required add an extra =$15+GST (each)
- Drilling through stainless sink or timber benchtop only.
Back-Wash Inline Whole House Filter
- Removes all sediment and debris from the water line which enters your houses mains
- Removes various chemicals from water line
- Lessens the hardness of the water system, this in turn would leave very scummy glass shower screens and white scale on tiles
- There is no need to install a kitchen filter as the water is already filtered
- There is no need to change the filter on the system, just a simple backwash which flushes and cleans the filter.
To supply and install = $750+GST
EXTRAS
- Should your meter not be in an easily accessible location – i.e pavers or concrete, this will be quoted as extra.
